[tab name="OVERVIEW"]

Bi-Wired: Two sets of the award winning Level 2.1 ANTICABLES Speaker Wires that are joined together at the amplifier end, and with all four wires woven together. This provides a pair of very nice cable looking wire runs with two spades (or bananas) on each amplifier end and four spades (or bananas) at each speaker end for a pair of bi-wireable speakers.

Announcing New Level 2.1 Speaker Wires

The wire used to make our Level 2 and Level 3 Speaker Wires and Jumpers has been improved. The sonic improvement is enough they are now declared our Level 2.1 and Level 3.1 Speaker Wires and Jumpers. This new wire is so good, these new Level 2.1 Speaker Wires now sound even better than our former Level 3 Speaker Wires. Yes, the lower cost product actually leap-frogged the former more expensive offering. Sonic improvements listed below.

View the full evolution of our Jumper and Speaker Wire improvements HERE. [tab name="TECHNICAL"]

New RDD™ Wire

ANTICABLES launched a 6 month research project with Material Scientist Dr. Douglas Stauffer, and collaborating with the US facility that draws the wire to our specification, we have changed the wire drawing process to greatly reduce the dislocation density of the copper. Learn more about this new Reduced Dislocation Density (RDD™) wire HERE.

Highlights:

• New Reduced Dislocation Density (RDD™) wire
• Very Affordable
• Starts at only only $55 per speaker
• Additional length costs only $15/ft per speaker
• 30 day risk free trial
• Two sets of the award winning ANTICABLES Level 2.1 Speaker Wires built together
• Four #12 Gauge Wires to Each Speaker
• Oxygen Free Copper (not ETP copper magnet winding wire)
• Copper impurities have been reduced down to 5 parts per million
• Made in USA (one pair at a time in Lake Elmo MN)
• Neutral, Transparent, with a Purity of Tone
• The best way to predict what they will sound like in your system is to read what other customers have experienced (see Testimonials)

Our new Reduced Dislocation Density (RDD™) Wire provides:

• An increased sense of volume
• More "real" sounding midrange
• Less grain noise
• Even smoother highs (like driving on a newly blacktopped road)
• More bass and better bass articulation
• More exciting and involving
[tab name="REVIEWS"]

Reviewer Andrew Quint of The Absolute Sound said of the original Level 2 Bi-Wires:

"I began my listening with the jumpers in place, utilizing my usual ($3,600) Transparent Ultra (Generation 5) speaker cables. The only bi-wire set I own are the outrageously overachieving AntiCables Level 2 model ($164 for a six-foot pair!) and I was more than a bit surprised at the improvement I heard in transparency, dynamic nuance, and soundstage continuity when I substituted them for the Transparent cables."

Real Customer Testimonials:

"Dear Sirs, yesterday I have got the Level 2 bi-wiring cables. After a few hours it was clear that it sounds better than my 2,700 EUR ($3,200) Vovox Textura cable with my ($16,000) Tannoy Kensington GR speakers. Thank you,"

Michael Exner, Germany

-

Read many more testimonials HERE [tab name="ADDITIONAL FEATURES"]

Additional Features:

• Wires are woven together which makes them easier to manage, better looking, and keeps inductance low for best sound
• No thick plastic jacketing, which adds dielectric effect distortion and smears the audio signal
• Sound less like a speaker cable and more like real music than cables costing 10 - 100 times more (see Testimonials)
[tab name="PURCHASE OPTIONS"]

Optional Terminations Available (click on above image thumbnails to view)

• Comes standard with our excellent sounding proprietary Oxygen Free Solid Copper Spades which are .525" wide and fit standard 1/4" (6mm) and 5/16" (8mm) Binding posts
• Banana BFA style Z-Plugs made of Gold Plated Beryllium Copper (not Brass), add $10/four
• Medium Sized Copper Spades (.430" wide) for Barrier Strip Screw Terminals (older ARC amps and Vandersteen speakers)
• Vintage Copper Spades (.320" wide) for small screw terminals on 60's amps (Scott, Fisher, Dynaco, McIntosh, etc.)
• Un-Terminated Bare Wire Ends




Configurations:

• The standard Bi-Wire configuration is to have all 4 wires woven together
• There is the option to have a "True-Bi-Wire" configuration. If this option is selected, there will be two twisted (+)/(-) wire pairs coming from each pair of spades (or bananas) at the amplifier end. Keeping each pair truly separate from each other is recommended by Richard Vandersteen for his Bi-wireable speakers.

Upgrade Paths:


• For the very best, Bi-Wire using our Level 3.1 Speaker Wires.
[endtab]